Conicity | : |    5 Deg 57′, 4 Deg 20′ & 3 Deg 30′ |
Surface finish types | : |    5Velvet finish |
ANGLE | LENGTH (INMM) | WEIGHT (IN G) | INSIDE DIAMETER BASE (IN MM) | FINISH |
---|---|---|---|---|
1° 50′ | 280 mm | 60g 70g 80g | 63 mm | Velvet finish/Bull nosed or hardened ends/ Thread reserve groove /Thread notch/ Symbols in different colours |
3° 30′ | 175 mm | 30g | 46 mm | Velvet finish/Bull nosed or hardened ends/ Thread reserve groove/Thread notch/ Symbols in different colours |
3° 30′ | 230 mm | 50g 60g 70g 77g | 71.5 mm | Velvet finish/Bull nosed or hardened ends/ Thread reserve groove/Thread notch/ Symbols in different colours |
3° 30′ | 280 mm | 55g 60g 70g | 62 mm | Velvet finish/Bull nosed or hardened ends/
Thread reserve groove/Thread notch/ Symbols in different colours |
4° 20′ | 170 mm | 32g 36g 40g | 59 mm | Velvet finish/Bull nosed or hardened ends/ Thread reserve groove/Thread notch/ Symbols in different colours |
3° 30′ | 280 mm | 32g 36g 40g 40g 40g | 68 mm | Velvet finish/Bull nosed or hardened ends/ Thread reserve groove/Thread notch/ Symbols in different colours |
Embossing is used for coarse and lively yarns. This surface provides extra resistance to yarn slippage. However fine embossing surface is provided for medium count yarn and for the threads where take off could be restricted by the above bold embossing surface.